Slideshow Slideshow Slideshow Slideshow Slideshow

Roller Shutters

Roller Shutters

Roller Shutter Roller Shutter Roller Shutter Roller Shutter

Overview

The Clearview Perforated Rolling Shutter can be installed to suit most applications due to the 'reverse' rolling characteristics of the door sections.

Door Sections

The Clearview shutter is constructed from 70mm galvanised steel scrolled sections, which interlock using preformed scrolled joint sections. The perforations within the 70mm section are: 1.5mm in diameter, with 12,000 holes to the square metre. The door sections are held in place using extruded nylon endcaps, fitted to every second lath. This stops lateral movement within the curtain.

The Clearview perforated lath has a visibility characteristic of 75% per square metre. The Curtain is available in 18mm, 20mm and 22mm gauge and can be powder coated in any BS or Ral colours.

The Clearview perforated shutter is manufactured with galvanised steel guides, available in 50mm, 75mm and 100mm sectional depths.

Bottom Rail

A steel bottom rail is supplied in a choice of styles and may incorporate a rubber seal to protect specialist flooring or create a weather seal.

Operation

The Clearview shutter can be operated by a single phase motor (incorporating a manual override) or an integral sprung barrel allowing manual operations.

Finish

The Clearview perforated shutter can be supplied in a range of PPC finishes.

If you would like more information on roller shutters please contact Solex Manufacturing and talk to one of our representatives.